Standard viscosity polydimethylsiloxane

Polydimethylsiloxane 1.excellent water-repellent properties 2.high flash point 3.high heat resistance

Standard viscosity polydimethylsiloxane

PropertiesPolydimethylsiloxane is a clear, odorless and colorless liquid.

Product data

Typical general characteristics	Value
Appearance	colorless, clear
Viscosity, dynamic at 25 °C	95 - 105 mPa.s
Density at 25 °C	approx. 0,96 g/cm3
Refractive index at 25°C	approx. 1,403
Surface tension at 25 °C	0,021 N/m
Flash point	> 275 °C
Viscosity, kinematic at 25 °C	100 mm2/s

These figures are only intended as a guide and should not be used in preparing specifications. 

Special features- minimal change in physical properties over a broad temperature range- excellent water-repellent properties- good dielectric properties- low surface tension and thus high surface activity- chemically highly unreactive- low solidifying point- high flash point- high heat resistance- good solubility in a wide range of solventsApplication- release agent- lubricant- hydraulic fluid- antifoam agent- water-repellent agent- liquid dielectric for electrical and electronic equipment- heat-transfer oil- polish additive- plastics additive- additive for textile and fiber auxiliariesProcessingDue to Qunyue SILICONE FLUID's many diverse applications, no general processing information can be provided. Parameters will vary from application to ApplicationAvailable in a range of viscosities,Qunyue SILICONE FLUIDS AK are miscible with each other in any ratio. The standard product's viscosity can thus be altered to suit your individual needs.Polydimethylsiloxane is a non-polar liquid and is immiscible with polar solvents such as water or short-chain alcohols. In aliphatic and aromatic hydrocarbons, chlorohydrocarbons, ethers, esters, ketones and higher alcohols, Polydimethylsiloxane is soluble in any proportion.Before the product is used with solvents for the first time, it is advisable to perform a lab-scale test.When solvents are used, please remember to read the appropriate hazard information.StorageThe 'Best use before end' date of each batch is shown on the product label.Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.Maximum temperature allowed during storage and transportation: 50 °CSafety notesComprehensive instructions are given in the corresponding Material Safety Data Sheets. They are available on request from Qunyue office.

Standard viscosity polydimethylsiloxane